Suggested solution: Programming software
Table of contents
- Revision history
- 404DLS
- Further applicable documentation
- What are the connection options for the FlexxPump?
- loading...
- Which connection cable is used for the PLC?
- loading...
- How can I actuate the pump?
- Suggested solution: Programming software
- Connecting FlexxPump to power supply
- Lubrication
- Filling hydraulic lines / venting the FlexxPump
- Error message: Empty
- Error message: General
- Does the carrier have to move on initial lubrication?
- What can I use to initially lubricate the guideways and racks?
- Does the pump have to be mounted on the carrier?
- What maximum hydraulic line length is permitted?
- loading...
- Are the hydraulic lines prefilled ex works?
- Can I use the same lubrication quantities and intervals during start-up phases as during operation?
- What effect do extended commissioning phases have on the lubrication system?
- How do I determine the correct lubricant quantity?
- loading...
- Is there an ideal value for the lubrication parameters [km] or [h]?
- What happens if the lubrication settings are incorrect?
- How do I find out if the automatic lubrication is functioning correctly?
- loading...
- How can I evaluate feedback from the pump?
- loading...
- What error messages are possible?
- loading...
- How happens to the lubrication system during long downtimes >2 months?
- What do I do if the lid of the cartridge is in the lubricant instead of above it?
- How do I replace the cartridge?
- loading...
- 402
- loading...
- 402B
- loading...
